Interior lighting WAS LW10/728sw with switch, 12V (12 diodes)
Code: 100672Product detailed description
- LED interior lighting with integrated switch
- The light is equipped with 12 pcs of high luminous LEDs in smd design and built-in push-button switch
- The flashlight is switched on and off by pressing the button. The torch is always switched off when connected to the power supply, even if it was switched on the last time it was disconnected from the power supply. It is always switched on by pressing the button.
- Light color bright white
- Clear flexible diode cover with high resistance to breakage
- Two holes with a diameter of 4.5 mm and a central spacing of 213.4 mm are provided at the ends for mounting the lamp. Cables with a length of approx. 37 cm are led out of the flashlight.
- Practical rubber pad included for easier mounting on uneven surfaces
- Height of flashlight only 10.4 mm + 7.5 mm button, with rubber pad 12.8 mm + 7.5 mm button
- Operating voltage 12 V DC, polarity does not matter, power consumption only 2.2 W (24 V available on request)
Additional parameters
| Category: | Interior trailer lighting |
|---|---|
| EAN: | 5901323120350 |
| materiál: | plast |
| délka kabelu (m): | 0.37 |
| hloubka (mm): | 20.6 |
| provedení lampy: | LED |
| provozní napětí: | 12V |
| rozteč montážních šroubů/otvorů (mm): | 213.4 |
| consumption (at 12V) (W): | 3 |
| šířka (mm): | 238 |
| typ vstupu (připojení): | cable |
| výška (mm): | 10.4 |
| lamp switch: | Yes |
Be the first who will post an article to this item!
Add a rating
Be the first who will post an article to this item!