Trailer lighting
Bestsellers
Brands
Rear combined LED lamp FRISTOM FT-170 with AMP 7PIN connector . This lamp is originally supplied on Gromex trailers .
Rear combined LED lamp FRISTOM FT-170 with AMP 7PIN connector . This lamp is originally supplied on Gromex trailers .
Combined lamp WAS W184DD 12-24V, L, BL/BR/KO/ ML/CO, baj7, dyn. blinker IP66/68
Combined LED lamp WAS W184DD 12-24V, P, BL/BR/KO/ ML/CO, baj7, dyn. blinker IP66/68
Additional LED contour lamp with the function of front, rear and side contour lamps. Automatically adjusts to 12-36V voltage. The lamp can be connected classically as a normal...
Additional contour LED lamp Fristom FT 140 A P LED, 12-24V with cable
Original ZTRAILER position light, used on the side of the trailer
Original ZTRAILER position light, used on the front of the trailer
Yellow LED position light with cable and connector QS075.
Yellow LED position light with cable and AMP connector.
White LED position light with 2x0.75 mm² cable and quick connector QS075
White LED position light W45 with cable 2x0.75 mm², with reflector and quick connector.
The CAN BUS fault message eliminator for the combined LED trailer lights simulates the operation of common incandescent lights for the tow truck electronics that control the...
Yellow LED position light with cable and AMP connector.
The reduction is used to connect a trailer equipped with a standard seven-pole plug - fork (ISO 1724 type 12N) to a 13-pole car socket (ISO 11446). The short design does not get...
The reduction is used to connect a trailer with a thirteen-pole 12V plug - fork (ISO 11446) to a standard seven-pole 12V socket (ISO 1724) of the towing vehicle. The short...
