Twin-Axle Aluminium Car Transport Trailers GROMEX

GROMEX twin-axle aluminium car transport trailers offer a lightweight, robust and versatile solution for transporting passenger cars, sports cars, lighter SUVs and a wide range of other loads. At PKtechnik Trailers, we offer four carefully selected versions: GROMEX L4.1 – 2,700 kg, L4.6 – 2,700 kg, L4.6 – 3,000 kg and L5.2 – 3,000 kg. Our selection is based on over 20 years of experience with car transport trailers and long-term feedback from professional vehicle transport operators. These trailers feature a robust aluminium chassis built around two substantial longitudinal C-section profiles, an unladen weight starting at just 420 kg, a high payload capacity and excellent value for money. They are equipped with AL-KO axles and braking systems and modern 195/55 R10 tyres, allowing a low loading deck height of just 600 mm above the road. The flat, full-width perforated aluminium loading deck, reinforced stainless-steel lashing openings and additional securing points along the side members provide exceptional flexibility. As a result, GROMEX can be used not only as a professional car transporter but also as a versatile flatbed trailer for machinery, technical equipment and industrial loads. For safe and comfortable operation, we primarily recommend twin-axle models for vehicles weighing up to approximately 2,200 kg. For heavier vehicles, we recommend considering a tri-axle version with greater operating reserves. We also offer an extensive range of GROMEX accessories and spare parts in stock, with delivery throughout Europe.
Product sorting
List of products
GROMEX Twin-Axle Aluminium Car Transport Trailers – Selected Through 20 Years of Experience
GROMEX twin-axle aluminium car transport trailers provide a lightweight, robust and cost-effective solution for transporting passenger cars, sports cars, estate cars, lighter SUVs and various other loads. They combine an aluminium chassis, exceptionally low unladen weight, high payload capacity and excellent driving characteristics.
At PKtechnik Trailers, we do not select GROMEX models at random. Drawing on more than 20 years of practical experience with car transport trailers, operational knowledge and long-term customer feedback, we carefully choose and order the versions that offer the most sensible combination of loading deck length, unladen weight, payload capacity, construction and towing stability.
Our aim is not to offer the largest possible number of variations, but to select technically sound and practical car transport trailers for specific applications. For this reason, our twin-axle GROMEX range focuses on four versions: GROMEX L4.1 – 2,700 kg, L4.6 – 2,700 kg, L4.6 – 3,000 kg and L5.2 – 3,000 kg, with loading deck lengths ranging from approximately 4.1 to 5.2 metres.
Four Twin-Axle GROMEX Versions – The Right Length and Payload
These four versions differ mainly in loading deck length, unladen weight and maximum authorised mass. This allows customers to choose a trailer that suits the dimensions and actual weight of the vehicle or other load being transported.
- GROMEX L4.1 – 2,700 kg: a compact aluminium car transporter with a loading deck measuring approximately 412 × 210 cm and an unladen weight starting at 420 kg. The calculated payload of the basic version is approximately 2,280 kg. Particularly suitable for standard passenger cars, shorter sports cars and general transport applications.
- GROMEX L4.6 – 2,700 kg: a versatile car transporter with a loading deck measuring approximately 455 × 210 cm and an unladen weight starting at 520 kg. The calculated payload of the basic version is approximately 2,180 kg. Offers additional space for longer passenger cars, machinery and other loads.
- GROMEX L4.6 – 3,000 kg: a version with a loading deck measuring approximately 455 × 210 cm, an unladen weight starting at 520 kg and a calculated payload of up to approximately 2,480 kg. An excellent option for customers requiring a higher technical payload and additional weight reserves.
- GROMEX L5.2 – 3,000 kg: the longest twin-axle version, with a loading deck measuring approximately 520 × 210 cm and an unladen weight starting at 560 kg. The calculated payload of the basic version is approximately 2,440 kg. Particularly suitable for longer vehicles and larger loads.
Unladen weights and payload capacities may vary depending on the equipment fitted to each trailer. The technical specifications stated in the relevant Certificate of Conformity (COC) always take precedence.
Car Transporters for Vehicles up to 2,200 kg – Why Do We Recommend a Weight Reserve?
We primarily recommend GROMEX twin-axle car transport trailers for vehicles with an actual weight of up to approximately 2,200 kg. This recommendation is based on our long-standing practical experience and our emphasis on safe, stable and comfortable trailer operation.
The actual weight of a vehicle can be higher than its published catalogue figure. Optional equipment, fuel, operating fluids, additional cargo and aftermarket accessories all contribute to its weight.
For this reason, we do not consider it ideal to select a car transporter solely according to its maximum technical payload. A sufficient weight reserve is an important consideration for reliable and comfortable long-term use.
This is particularly relevant when transporting modern SUVs and electric vehicles, whose operating weights may be considerably higher due to extensive equipment and large traction batteries.
For vehicles weighing more than approximately 2,200 kg, we recommend considering a GROMEX tri-axle car transporter. Depending on the model, a tri-axle trailer may offer a higher payload capacity, additional operating reserves and favourable towing characteristics when transporting heavier vehicles.
The 2,200 kg figure is a professional recommendation from PKtechnik Trailers, not a universal technical payload limit for all twin-axle models. The actual vehicle weight, trailer specifications and permitted weights of the complete towing combination must always be taken into account.
Why Are GROMEX Twin-Axle Models Limited to 3,000 kg Gross Weight?
Current GROMEX twin-axle aluminium car transport trailers are produced with a maximum authorised mass of 2,700 or 3,000 kg. The previously available 3,500 kg twin-axle version is no longer manufactured. GROMEX car transporters with a maximum authorised mass of 3,500 kg now use three axles.
This approach also reflects our long-standing philosophy when selecting car transport trailers. For heavier vehicles, we favour three axles, adequate operating reserves and the lowest practical centre of gravity for the load.
A twin-axle trailer with a maximum authorised mass of 3,500 kg requires axles and tyres designed to withstand higher individual loads. Depending on the chassis design, larger wheels may be necessary, potentially increasing the loading deck height and the centre of gravity of the transported vehicle.
The GROMEX tri-axle design distributes the load across six wheels while maintaining the advantages of a low loading deck when equipped with R10 tyres.
This does not mean that every 3,500 kg twin-axle car transporter has poor towing characteristics. However, based on our practical experience, we prefer a suitably rated tri-axle design for the regular transport of heavier vehicles.
Robust Aluminium Chassis with Two Longitudinal C-Section Profiles
GROMEX car transport trailers feature a robust aluminium chassis built around two substantial longitudinal C-section profiles. This construction represents an important advantage over simpler chassis designs based solely on longitudinal U-section profiles.
The two robust C-sections form the main longitudinal load-bearing members of the trailer and, together with the other structural components, contribute to the strength and rigidity of the chassis.
The construction is complemented by a full-width perforated aluminium loading deck, which contributes to the trailer's torsional rigidity while providing numerous options for securing vehicles and other loads.
Through the efficient use of aluminium profiles, GROMEX twin-axle car transporters achieve an unladen weight starting at just 420 kg while maintaining a high payload capacity.
The aluminium construction also offers good corrosion resistance and a long service life. Steel components are used primarily where technically necessary, including axles, braking systems and certain connecting elements.
Modern 195/55 R10 Tyres – Low Centre of Gravity and Comfortable Towing
One of the key design features of GROMEX car transport trailers is their 195/55 R10 wheel and tyre configuration. The smaller overall wheel diameter makes it possible to maintain a low loading deck, a favourable centre of gravity for the transported load and a suitable coupling height.
Compared with 195/50 R13 tyres, 195/55 R10 tyres have a smaller overall diameter but a taller tyre sidewall. With correct inflation and loading, this can provide good ride comfort and help absorb minor road irregularities.
The nominal overall diameter of a 195/55 R10 tyre is approximately 469 mm, compared with approximately 525 mm for a 195/50 R13 tyre. The difference is therefore around 56 mm.
The smaller R10 wheels allow GROMEX trailers to maintain a low chassis design while delivering very good towing characteristics.
PKtechnik Trailers has long preferred R10 wheels over R13 wheels. This recommendation is based on practical experience with more than 1,000 GROMEX trailers sold and feedback from professional vehicle transport operators who have compared both configurations over extended periods.
In our experience, quality R10 tyres perform very well not only on shorter twin-axle models but also on the longest GROMEX tri-axle car transporters, including the 8.5 model.
R10 Tyre Service Life – Quality, Load and Operating Conditions Matter
A smaller tyre diameter means more wheel revolutions over the same distance. However, a higher number of revolutions does not automatically result in faster wear, overheating or a greater risk of tyre failure.
Tyre construction, quality, correct inflation pressure, suitable load and speed ratings, axle alignment and operating conditions all play important roles in tyre service life.
Our practical experience confirms that quality 195/55 R10 tyres can provide very good durability and reliability when used correctly.
Both R10 and R13 wheel configurations may be approved for the relevant GROMEX versions. Nevertheless, based on our long-term operating experience, we clearly recommend R10 wheels.
Low 600 mm Loading Deck – Easy Vehicle Loading Without a Tilting Mechanism
All GROMEX car transport trailers equipped with R10 wheels have a loading deck height of 600 mm above the road surface. This low construction height makes vehicle loading easier and contributes to a favourable centre of gravity for the transported load.
Combined with 2,500 mm long aluminium loading ramps, the design allows convenient loading of standard passenger cars and many sports cars.
A major advantage of GROMEX is that the low loading height is achieved without a complicated tilting mechanism or hydraulic system. The straightforward construction means fewer moving components, lower unladen weight and reduced maintenance requirements.
The actual loading angle depends on the trailer model, its load, the position of the towing combination and the ground clearance of the vehicle being transported.
Two AL-KO Axles, Wider Axle Spacing and a Stable Chassis
GROMEX twin-axle car transporters are equipped with two axles and a braking system from the renowned manufacturer AL-KO. These components provide an important foundation for reliable operation, effective braking and long service life.
Another characteristic feature of GROMEX is the greater spacing between the axles, which can contribute to smoother towing behaviour and good directional stability when the trailer is correctly loaded.
Correct load distribution, appropriate nose weight and compliance with the permitted weights of both trailer and towing vehicle are essential for safe and comfortable towing.
For the regular transport of vehicles weighing more than approximately 2,200 kg, we recommend considering a GROMEX tri-axle version with a longer axle group and suitable payload capacity.
Perforated Aluminium Loading Deck and Securing Points Along the Side Members
All GROMEX twin-axle car transporters feature a full-width perforated aluminium loading deck, which contributes to the torsional rigidity of the trailer and provides numerous options for securing transported vehicles.
The large number of lashing openings allows flexible positioning of securing straps according to the dimensions and construction of the transported vehicle or other load.
The lashing openings in the loading deck are fitted with stainless-steel reinforcements, helping to protect the aluminium against mechanical damage when securing equipment is used.
All GROMEX twin-axle models also allow loads to be secured using the side members of the loading deck. This increases flexibility and makes it easier to secure vehicles and other cargo of different sizes.
The combination of securing points in the perforated deck and along the side members is particularly useful for regular professional transport operations. Loads must always be secured using suitable designated points and within their permitted load ratings.
Versatile Applications – A Car Transporter and Practical Flatbed Trailer in One
GROMEX aluminium car transport trailers are not limited to transporting vehicles. Thanks to their flat, full-width perforated aluminium loading decks, they offer a wide range of additional applications, much like conventional flatbed trailers.
Unlike many traditional car transporters with separate wheel tracks, GROMEX trailers feature a continuous, level loading deck across the full width of the trailer. This allows them to transport not only cars but also machinery, technical equipment, structural components and other loads of suitable dimensions and weight.
The numerous lashing openings in the perforated aluminium deck, together with additional securing options along the side members, provide excellent flexibility when securing different types of cargo.
Although GROMEX trailers are used for vehicle transport in approximately 90% of applications, based on our experience, our customers also include businesses from various industrial sectors. These customers particularly appreciate their versatility, low unladen weight, high payload capacity and robust aluminium construction.
GROMEX therefore combines the advantages of a professional car transporter with the versatility of a flatbed trailer. Customers benefit from a single trailer that can handle different transport tasks rather than being restricted exclusively to vehicle transport.
When transporting loads other than vehicles, the permitted capacities of the trailer, individual axles, loading deck and securing points must always be respected. Cargo must be properly secured using suitable equipment.
GROMEX Accessories and Spare Parts in Stock – Delivery Throughout Europe
PKtechnik Trailers supplies not only GROMEX car transport trailers but also an extensive range of accessories and spare parts for their operation and maintenance.
In this category, you will first find the twin-axle car transporters themselves, followed by commonly used accessories and compatible spare parts.
One of our key advantages is a systematically organised spare parts and accessories catalogue available in 12 languages. This makes it easier for customers to find suitable components directly within the relevant trailer category.
We maintain extensive stock levels and deliver accessories and spare parts to customers throughout Europe.
By choosing a GROMEX car transporter, customers benefit not only from a high-quality trailer but also from long-term access to accessories, replacement components and professional advice.
Why Do We Recommend These Particular GROMEX Models? The PKtechnik Trailers Experience
Our recommendations are based on more than 20 years of practical experience with car transport trailers. During this time, we have gained extensive knowledge of trailer construction, towing characteristics, stability, tyre durability and everyday operation by professional vehicle transport companies.
PKtechnik Trailers has sold more than 1,000 GROMEX trailers. Our customers include professional transport operators who use several trailers simultaneously and regularly provide valuable feedback from everyday operation.
Based on this experience, we carefully select and order the GROMEX models that we believe offer the best combination of loading deck length, unladen weight, payload capacity, towing stability, versatility and operating costs.
We do not focus solely on the maximum technical payload listed in the manufacturer's catalogue. When recommending a trailer, we consider the actual weight of the vehicle or other cargo, necessary weight reserves, load distribution, number of axles, wheel size and intended use.
This is why we primarily recommend GROMEX twin-axle car transporters for vehicles weighing up to approximately 2,200 kg, while preferring a suitably rated tri-axle version for heavier vehicles.
Our goal is to offer customers a trailer that not only meets the technical requirements but also provides safe, stable, comfortable, versatile and economical long-term operation.
PKtechnik Trailers – one of the leading trailer dealers in Central Europe. GROMEX aluminium car transport trailers, over 20 years of experience, professional advice, accessories and spare parts in stock, with delivery throughout Europe.