Overrun brake body AL-KO 200V (2nd generation), right part
Code: 101461Related products
Support wheel holder handle M12x110 mm (for 150V/200V brake)
ON STOCK
(4 pcs)
10 € incl. VAT
8,30 €
Pressure segment of brake support wheel AL-KO 150V/200V
ON STOCK
(3 pcs)
10 € incl. VAT
8,30 €
Plastic wing nut AL-KO for 200V and 150V silencers
ON STOCK
(3 pcs)
2,50 € incl. VAT
2,10 €
Overrun brake AL-KO 200V (for 2361) without joint
ON STOCK
(3 pcs)
578,60 € incl. VAT
478,20 €
Overrun brake AL-KO 200V (for 1637/2051) without joint
ON STOCK
(1 pcs)
568,60 € incl. VAT
469,90 €
Overrun brake AL-KO 200V (for 1637/2051) with AKS 3004
ON STOCK
(1 pcs)
866,10 € incl. VAT
715,80 €
Overrun brake AL-KO 200V (for 2361) with AKS 3004
ON STOCK
(3 pcs)
866,10 € incl. VAT
715,80 €
Product detailed description
- Right half (in the direction of travel) of the overrun brake body AL-KO AE 200V (2nd generation)
- This part is compatible with the ramp brakes with the ETI numbers listed below:
AE 200V - ETI 811611, 811825, 811841, 811899, 811907 - The complete ramp brake body consists of a right and left half. The two halves are connected at the rear by a damper thread. Between the two halves is screwed poudro - cartouche, in which the draw tube is placed. Only the right half of the body is included. Other parts can be ordered separately.
- AL-KO 200V brakes are widely used on caravans built on AL-KO chassis.
Additional parameters
| Category: | Accessories for trailer access brakes |
|---|---|
| EAN: | 1014611234562 |
Be the first who will post an article to this item!
Add a rating
Be the first who will post an article to this item!
Add a comment