Wheel bolt M12x1.5x24 ball head, for 17 mm wrench

Product detailed description

• Surface treatment by galvanic galvanization
• The screw has a hexagonal head for tightening with a wrench 17 mm
• Suitable for example for axles AL-KO and KNOTT up to a load capacity of 1800 kg per axle
• Unless otherwise specified by the vehicle manufacturer, the recommended tightening torque is 90 Nm
• Screw M12x1,5x24 with ball seating surface and hexagonal head for attaching the wheel disc to the axle hub
• It is recommended to tighten the wheel bolts crosswise - always. This ensures an even distribution of force and proper wheel fitting
• The 24 mm thread length is suitable for use in combination with metal discs. For ALU discs, it is usually necessary to choose a longer screw length according to the disc manufacturer's recommendations because of the greater thickness of the disc at the screw passage point
• The screw is intended exclusively for use with discs with a corresponding hole and ball screw seating surface. The use of a bolt with an unsuitable seating surface (e.g. tapered bolts for discs with a spherical seating surface) is unacceptable - apart from damaging the seating surface for the bolt, the bolts may loosen spontaneously during driving and the wheel may come loose