Winch AL-KO 900 COMPACT, with brake (900kg), without rope

Product detailed description

The winch is equipped with an automatic brake. During winding, the spool of the reel is secured against reverse rotation by an automatic latch. At the moment when you need to start lowering the load or just let it down a bit, simply start turning the handle in the opposite direction of winding and the latch is automatically disengaged without the need for manual unlocking. When the winding direction is changed again, the latch automatically engages again and blocks the coil against unwanted unwinding. However, after simple disassembly of the handle, the rope can be unwound without using the handle with a continuous pull. After unlocking the brake by moving the handle against the winding direction and then removing the handle, the rope can be slowly and smoothly pulled out of the winch to the required length, without the need to assist unwinding by turning the handle. The crank is mounted on the hexagon of the shaft and secured with two locking Allen screws. After loosening these screws, it can be easily removed.

Max. material vertically lifted load:

900 kg with an empty reel

330 kg with a full spool

Max. weight of diagonally towed rolling load:

5800 kg with empty reel, slope 10%

3600 kg with empty reel, slope 20%

2700 kg with empty reel, slope 30%

2100 kg at full spool, 10% incline

1300 kg at full spool, 20% incline

1000 kg at full spool, 30% incline

Max. weight of a horizontally and diagonally towed non-moving load with a coefficient of friction of 0.5:

1500 kg with empty reel, slope 10%

1300 kg with empty reel, slope 20%

1150 kg with empty reel, slope 30%

600 kg at full spool, 10% incline

500 kg at full spool, 20% incline

400 kg at full spool, 30% incline