Tyre 5.00-10 79M, KENDA K364, 6PR

Product detailed description

KENDA K364 – reinforced 6PR tyre for trailers

KENDA K364 5.00-10 79M is a reinforced 6PR tyre designed for trailers and heavy loads. It combines the compact dimensions of a 10-inch tyre with a load capacity of up to 437 kg per tyre and a speed rating of M – 130 km/h.

The K364 model is designed for trailer use. Its dimensions and load capacity make it suitable for a wide range of trailers that use 5.00-10 tyres.

Technical specifications

• brand: KENDA
• model / tread pattern: K364
• tyre size: 5.00-10
• load and speed rating: 79M
• load capacity: 437 kg
• speed rating: M – 130 km/h
• ply rating: 6PR
• tyre type: TL – tubeless
• overall tyre width: approx. 145 mm
• overall tyre diameter: approx. 513 mm
• rim diameter: 10 inches
• recommended rim: 3.50B
• maximum pressure: 3.4 bar / 340 kPa
• approval: ECE 54

437 kg load capacity per tyre

The load index of 79 corresponds to a maximum load capacity of 437 kg per tyre. Two tyres therefore have a combined nominal load capacity of up to 874 kg.

However, the combined load capacity of the tyres does not determine the trailer’s permitted gross weight or payload. The actual permitted load is also limited by the load ratings of the rims, axle and chassis, as well as the approved weights of the specific trailer.

Reinforced 6PR construction

This version of the KENDA K364 tyre is marked 6PR. Ply Rating indicates the strength category of the tyre’s construction and its suitability for higher loads.

This does not mean that the tyre must physically contain six fabric plies. The 6PR marking primarily indicates the strength category of its construction.

KENDA K364

K364 is a KENDA tread pattern designed for trailer use. The 5.00-10 79M 6PR version is tubeless and approved under ECE 54.

The M speed rating corresponds to a maximum tyre speed of 130 km/h, meeting the requirements of modern road trailers.

Compact 10-inch tyre

The tyre has an overall diameter of approximately 513 mm and an overall width of approximately 145 mm. Its compact 10-inch size suits trailers that require a low overall wheel height.

Compared with larger wheel diameters, a 10-inch wheel can allow for a lower loading platform, making loading and unloading easier.

Correct tyre pressure

The specified maximum pressure for the KENDA K364 5.00-10 79M 6PR tyre is 3.4 bar / 340 kPa. This is the tyre’s maximum pressure, not a universally recommended operating pressure.

When inflating the tyre, always follow the trailer manufacturer’s instructions and the markings on the specific tyre. We recommend checking the pressure when the tyre is cold, especially before a long journey or when carrying a heavy load.

For 10-inch trailer rims, size 3.50B

The manufacturer recommends a 3.50B rim for the KENDA K364 5.00-10 79M tyre. The correct rim width and design are important for proper tyre seating and performance.

When replacing the tyre, always check that the specific rim is suitable for the 5.00-10 tyre size.

The price is for 1 tyre without a rim.