Additional sides 308 mm, Brian James Tipper 310×160

Product detailed description

Key benefits

• second row of steel sides, 308 mm high
• increases the total side height to 616 mm
• doubles the load volume from 1.5 m³ to 3.1 m³
• genuine Brian James accessory
• Brian James Click & Clamp system
• removable design
• choice of 5 colours for the accent strip

Compatibility

Designed for Brian James Tipper tipping trailers with a 310 × 160 cm load bed. (BJT 3.1x1.6 m)

Load bed dimensions: 3100 × 1600 mm
Standard side height: 308 mm
Additional side row height: 308 mm
Total side height: 616 mm
Volume with standard sides: approx. 1.53 m³
Volume with additional side row: approx. 3.06 m³
Package: complete set for the trailer, including posts

Colour options and genuine Brian James part numbers

The steel sides are supplied in the characteristic Brian James metallic finish. You can choose the colour of the accent strip on the outside of the sides.

Yellow: P-SIXT-6510-K-N
Blue: P-SIXT-6512-K-N
Black: P-SIXT-6514-K-N
Red: P-SIXT-6516-K-N
Anthracite: P-SIXT-6518-K-N

The Brian James second row of sides is a genuine accessory for Brian James Tipper tipping trailers with a 310 × 160 cm load bed. It provides a simple way to increase the volume of the tipping body when transporting lightweight and bulky loads.

The additional row is 308 mm high and is installed above the trailer's standard steel sides, which are also 308 mm high. This increases the total side height from the original 308 mm to 616 mm.

Double the load volume

The second row of sides effectively doubles the theoretical load volume from approximately 1.53 m³ to 3.06 m³. It is particularly suitable for transporting branches, garden waste, timber, insulation materials, packaging materials and other lightweight or bulky loads.

The additional sides retain the versatility of the Brian James Tipper. When required, the second row can be removed and the trailer can once again be used with the standard sides only.

Brian James Click & Clamp system

The additional row of sides uses the Brian James Click & Clamp system with self-adjusting locking posts and double side clamping. The system provides excellent rigidity and reduces unwanted movement and rattling of the sides while driving.

The design also requires no cross braces across the load bed, so even with the increased side height, the tipping body remains completely unobstructed for loading bulky materials.