Zusätzliche perforierte Bordwände 660 mm für Brian James Tipper 360×200 cm. Gesamte Bordwandhöhe 968 mm, Ladevolumen bis zu 7,0 m³.

Product detailed description

Key benefits

• Side Extensions with a height of 660 mm
• total side height including the standard sides: 968 mm
• increases the load volume from 2.2 m³ to 7.0 m³
• combined solid and perforated construction
• galvanised steel construction
• removable design

Compatibility

Designed for Brian James Tipper tipping trailers with a 360 × 200 cm load bed. (BJT 3.6x2.0 m)

Load bed dimensions: 3600 × 2000 mm
Standard side height: 308 mm
Side Extension height: 660 mm
Total side height: 968 mm
Volume with standard sides: approx. 2.22 m³
Volume with Side Extensions: approx. 6.97 m³
Construction: galvanised steel, solid and perforated design
Original Brian James part number: P-SIXT-6004-K-N
Package: complete set for the trailer, including additional posts

Side Extensions 660 mm

The Brian James perforated Side Extensions are genuine accessories for Brian James Tipper tipping trailers with a 360 × 200 cm load bed. They create a high-sided load area designed primarily for the efficient transport of lightweight and bulky loads.

The extension has a height of 660 mm and is fitted above the trailer's standard 308 mm high steel sides. This increases the total side height from the load bed to 968 mm.

Solid and perforated construction

The Side Extensions are made from galvanised steel and combine a solid lower section with a perforated upper section. The perforated design reduces the amount of material used in the upper section of the high-sided extension while maintaining an enclosed perimeter around the load area.

The high sides are particularly suitable for transporting branches, leaves, garden waste, timber, wood chips, packaging and insulation materials, as well as other lightweight or bulky loads. They are therefore ideal for landscaping companies, grounds maintenance, municipal services, construction companies and general commercial use of the trailer.

More than triple the load volume

With a load bed measuring 360 × 200 cm, the standard 308 mm high sides provide a theoretical load volume of approximately 2.22 m³. After fitting the Side Extensions and increasing the total side height to 968 mm, the theoretical load volume increases to up to 6.97 m³.

The load volume is therefore increased to more than three times the standard capacity, significantly improving the versatility of the tipping trailer when transporting materials where volume rather than weight is the main limiting factor.

Removable genuine Brian James accessory

The Side Extensions are designed as a removable extension system. Depending on the job, the Tipper can therefore be used with the high perforated sides or returned to its standard configuration after they have been removed.

This is a genuine Brian James Trailers accessory designed specifically for the corresponding Tipper trailer size.