Tyre 195/55 R10C 98/96P, WANDA WR068

Product detailed description

WANDA WR068 – reinforced tyre for trailers

WANDA WR068 195/55 R10C 98/96P is a reinforced radial tyre intended primarily for trailers and other applications involving heavy loads. Its construction combines high load capacity with compact dimensions, making it particularly suitable for car transporters and low-loader trailers.

The 195/55 R10C size offers a load capacity of up to 750 kg per tyre in single fitment. The P speed rating corresponds to a maximum tyre speed of 150 km/h.

Technical specifications

• brand: WANDA
• model / tread pattern: WR068
• tyre size: 195/55 R10C 98/96P
• load capacity in single fitment: 750 kg
• load capacity in dual fitment: 710 kg
• speed rating: P – 150 km/h
• marking: M+S – Mud + Snow
• rim diameter: 10 inches (R10)
• aspect ratio: 55
• tyre width: 195 mm
• overall width: approx. 201 mm
• tread depth: approx. 6 mm
• maximum pressure: 6.25 bar / 625 kPa

High load capacity – up to 750 kg per tyre

The load index of 98/96 corresponds to a maximum load capacity of 750 kg in single fitment and 710 kg per tyre in dual fitment.

When four tyres are fitted to a twin-axle trailer, their combined nominal load capacity in single fitment is up to 3,000 kg. However, this figure does not determine the trailer’s permitted gross weight or payload. The actual permitted load is always limited by the weakest component of the entire assembly, particularly the load ratings of the rims, axles and chassis, as well as the approved weights of the specific trailer.

Compact R10 size for a low loading platform

The 195/55 R10C size combines high load capacity with a very small overall tyre diameter of approximately 468 mm. This makes it particularly suitable for car transporters, low-loader trailers and other specialist trailers.

The small overall wheel diameter allows for a trailer design with a low loading platform and a favourable loading ramp angle, which is particularly important when loading cars with low ground clearance.

WANDA WR068 tread pattern

The WR068 tread pattern is designed for stable operation under heavy loads. Continuous tread blocks in the centre of the tread support stability and load transfer, while the shaped grooves help channel water away from the tyre’s contact patch.

The reinforced shoulder construction and wide contact patch are designed for trailer use, where the tyre must withstand heavy loads over extended periods.

M+S marking

The tyre carries an M+S – Mud + Snow marking. This indicates a construction and tread pattern intended to provide better performance in mud and snow than a standard road tyre.

However, the M+S marking is not the same as the 3PMSF marking (the three-peaked mountain and snowflake symbol) and does not, on its own, provide the same certification of winter performance.

Correct tyre pressure

The specified maximum pressure for the WANDA WR068 195/55 R10C 98/96P tyre is 6.25 bar / 625 kPa. This is the tyre’s maximum pressure, not a universally recommended operating pressure.

When inflating the tyre, always follow the trailer manufacturer’s instructions and the markings on the specific tyre. We recommend checking the pressure when the tyre is cold, especially before a long journey or when carrying a heavy load.

For 10-inch rims

The tyre is designed for suitable 10-inch trailer rims. The standard rim specified for this size is 6.00B.

The price is for 1 tyre without a rim.